Diode LED 24V Magnetic Dimmable Driver

Diode LED DI-MLV 24V Magnetic LED Dimmable Driver

$99.38

Description

The Diode LED DI-MLV 24V Magnetic LED Dimmable Driver converts line-voltage AC power into stable 24V DC output for compatible constant-voltage LED tape light and linear-lighting systems. Its magnetic low-voltage design supports forward-phase dimming, making it a dependable choice for residential, hospitality, retail and commercial installations using compatible MLV wall dimmers or standard on/off controls.

The hardwired driver is available in multiple capacities for projects ranging from short accent-lighting runs to larger multi-zone systems. Standard 120VAC models are offered from 20W through 300W, with Class 2 options available through 96W and multi-tap configurations for dividing higher-capacity power across separate LED loads.

Product Features

Supplies regulated 24V DC constant-voltage output for compatible Diode LED tape light and other approved 24V LED lighting products.
Supports smooth forward-phase control when paired with a compatible magnetic low-voltage dimmer selected for the connected load.
Is available in standard 120VAC configurations rated at 20W, 40W, 60W, 96W, 150W, 200W and 300W.
Provides multi-tap options for larger projects requiring separate low-voltage output circuits.
◦ The 192W model provides two 96W output sections.
◦ The 288W model provides three 96W output sections.
Is also offered in select 277VAC input versions for commercial electrical systems, including 20W, 40W, 96W, 200W and 300W configurations.
Requires the connected lighting load to remain within the specified operating range for the selected driver.
◦ Maximum connected loads are approximately 80% of the driver’s nominal wattage, including 16W on the 20W model and 77W on the 96W model.
◦ Minimum-load requirements vary by wattage and should be confirmed during system design to maintain proper dimming performance.
Maintains Class 2 output on the 20W, 40W, 60W and 96W models for simplified low-voltage wiring within applicable code requirements.
Uses hardwired terminal connections on the input and output sides for secure, permanent installation by a qualified electrician.
Includes primary and secondary auto-reset protection to help safeguard the driver and connected lighting system from qualifying electrical faults.
Features a durable NEMA 3R enclosure suitable for indoor or outdoor installations when mounted and protected according to the manufacturer’s instructions.
Must be installed in the specified vertical mounting orientation; horizontal or upside-down mounting can affect operation and void warranty coverage.
Operates in ambient temperatures from approximately -4°F to 104°F, with internal operating capability rated up to 158°F.
Works with many commonly specified dimmers from Lutron, Leviton and Legrand, although compatibility and dimmer load ratings should be verified before installation.
Is recommended for most compatible Diode LED tape-light families but is not intended for VALENT®, STREAMLITE™ or ALPHATECH® tape-light systems.
Carries an ETL listing for compliance with applicable United States and Canadian electrical safety standards.
Is backed by Diode LED’s 5-year limited warranty when properly selected, installed and operated within published specifications.

Why Choose the Diode LED DI-MLV 24V Driver?

The Diode LED DI-MLV 24V series gives installers a broad selection of wattages, familiar forward-phase dimming and hardwired magnetic construction for dependable tape-light installations. Its Class 2 options, multi-tap models and indoor/outdoor enclosure choices simplify system design, while end users receive stable low-voltage power, convenient wall-dimmer control and long-term performance backed by a five-year warranty.