The Max. Adjustability IC Airtight New Construction Housing is IC rated for direct contact with insulation and adjusts in frame to accomodate up to 1 1/2" ceiling thickness.
• IC rated for direct contact with insulation, for us in IC or non-IC conditions.
• Housing adjusts in frame to accomodate up to 1 1/2" ceiling thickness.
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
• Steel housing for greater heat dissipation. Stampled galvanized steel frame.
Installion: Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength swivel hanger bars can easily be nailed to joists. Maximum hole cutout is 3 5/8". Suitable for T-grid and drop ceiling applications.
Junction Box: Position to accomodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Hanger Bars: Pre-installed swivel hanger bars with TrueNail facilitate easy installation in regular lumber, engineered lumber and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.
• Input Voltage: 120V AC.
• Inherently protected.
Dimmability: based on lamp.
Lamp: designed for use with Elco 3" PEX diecast Trims and Koto LED Module.